B--B00F1 - 307
RECOMMENDED PRODUCTS MECHANICAL
1 - CLEANING PRODUCTS
| applications - data | suffix : | products Part No. |
supplier(s) |
|---|---|---|---|
| gelatinous liquid to be used for stripping joint faces and non-metallic joints | D2 | DECAPLOC 9731.25 |
FRAMET |
| aerosol spray to be used for unsticking and stripping joint faces and non-metallic joints | DECAPJOINT 9732.11 |
||
| degreaser SD 140 | D3 | 9736.57 | - |
2 - SEALING COMPOUNDS
| applications - data | suffix : | products Part No. |
supplier(s) |
|---|---|---|---|
| locking and sealing threaded assemblies which must remain removable | E3 | FRENETANCH 9732.48 |
FRAMET |
| sealing unions and joint faces | E4 | FORMETANCH 9732.46 |
|
| securing bearings, snap rings, sockets, sleeves, inserts, pulleys strengthening fluted and feathered engagements |
E5 | SCELBLOC 9732.47 |
|
| locking and sealing of studs, bolts, nuts, with maximum efficiency | E6 | FRENBLOC 9733.10 |
|
| sealing of joint faces, replacing traditional seals | E7 | FORMATJOINT 9732.45 |
|
| sealing of porous points on the cylinder block : aluminium based | E8 | POXY MATIC 9732.17 |
|
| sealing of joint faces subjected to high pressures and vibrations remains flexible after drying |
E10 | AUTOJOINT OR 9735.66 |
|
| sealing of exhaust connections (except ball joints) | E11 | ECHAPNET 9735.01 |
|
| strengthening of fixed assemblies : sealing | E12 | AUTO FORM 549 9733.68 |
|
| flexible joint capable of withstanding atmospheric agents | E13 | AUTO JOINT CLAIR 9731.61 |
|
| tight locking of threads bonding of caps to the cylinder block and cylinder head |
E14 | LOCTITE 275 9735.58 |
|
| sealing of joint faces, replacing traditional seals | E15 | FORMATJOINT 9732.45 |
3 - RELEASING AGENTS
| applications - data | suffix : | products Part No. |
supplier(s) |
|---|---|---|---|
| rusted or corroded parts and assemblies which have seized (in aerosol form) | F1 | 9731.68 | SADAPS - BARDHAL |
4 - LUBRICANTS
| applications - data | suffix : | products Part No. |
supplier(s) |
|---|---|---|---|
| grease with high adhesive capacity : grease for use mainly on the drive shafts | G1 | MOBIL 525 9732.03 |
CEPAC |
| grease with high adhesive capacity : grease which can be used on mechanisms subjected to high pressures and water splashes | MECAGRAISSE 9733.69 |
||
| heat resistant grease : grease to be used on the ball joints of the exhaust manifolds | G2 | LUBRITHERM G200 9733.44 |
|
| lubricant for arduous conditions : lubricant to be used on mechanisms subjected to water splashes, high pressures and extreme temperatures | G3 | LUBRITHERM G200 9733.44 |
|
| heat resistant grease : lubricant to be used on threaded parts fitted to the cylinder head (spark plugs) | G4 | LUBRITHERM G200 9733.44 |
|
| multi-purpose grease : grease to be used for routine work | G6 | 9735.72 | CEPAC |
| special purpose grease : grease to be used on anti-roll bar bearings | G7 | ESSO NORVA 275 9734.14 |
|
| special purpose grease : grease to be used when fitting ABS sensors | G9 | ESSO NORVA 275 9734.14 |
|
| Molykote G. Rapid plus grease : grease to be used when fitting cylinder head bolts | G10 | MOLYKOTE G 9732.05 |
|
| lubricant for sliding the windows in the door seal | G11 | KRYTOX.GPL103 9718.78 |
|
| grease for surfaces | G12 | MOLYKOTE BR2+ 9731.89 |
|
| multi-purpose grease (drive shafts RZEPPA) (steering rack) |
G13 | TOTAL N3945 9735.D2 |
5 - HYDRAULIC MINERAL FLUID
| applications - data | suffix : | products Part No. |
supplier(s) |
|---|---|---|---|
| hydraulic fluid for electric hood motor | M1 | ESSO UNIVIS J32 9735.57 |
CEPAC |