B1BG1IK1 - 307 TU5JP4 ENGINE

REMOVAL - REFITTING ANCILLARY DRIVE BELT

1 - SPECIAL TOOLS

[1] SEEM belt tension measuring equipment S.0192 .

2 - REMOVAL

Remove :

• the front right-hand wheel
• the mud shield
• the ancillary drive belt

3 - ROUTING AND TENSIONING

Slacken the bolt (1) .

Turn the screw (2) to adjust the tension of the ancillary drive belt .

Tension values :

• new belt = 87 SEEM units
• re-used belt = 61 SEEM units

AIR CONDITIONING

Slacken the bolt (3) .

Turn the screw (4) to adjust the tension of the ancillary drive belt .

Tension values :

• new belt = 120 SEEM units
• re-used belt = 58 SEEM units

ALL MODELS

4 - REFITTING

Set the tension to the indicated value .

Turn the crankshaft 2 turn(s) in the direction of running .

Check and adjust the tension to obtain the values quoted .

Fit :

• the mud shield
• the front right-hand wheel