B1DB3FK1 - 307 DW10TD ENGINE
IDENTIFICATION - DATA CYLINDER HEAD GASKET
1 - IDENTIFICATION
1 - 1 - 1ST FITTING : CYLINDER HEAD GASKET ELRING
(A) : Thickness identification .
1 - 2 - 2ND FITTING : CYLINDER HEAD GASKET REINZ
(B) : thickness identification .
2 - DATA
There are 5 categories of laminated metal cylinder gaskets .
| piston protrusion measurements (mm) |
thickness (mm) | notch(es) : at (A) or (B) |
|---|---|---|
| 0.47 to 0.605 | 1.30 ± 0.06 | 1 |
| 0.605 to 0.655 | 1.35 ± 0.06 | 2 |
| 0.655 to 0.705 | 1.40 ± 0.06 | 3 |
| 0.705 to 0.755 | 1.45 ± 0.06 | 4 |
| 0.755 to 0.83 | 1.50 ± 0.06 | 5 |
IMPERATIVE : if the value measured does not correspond to the values indicated, investigate the origin of the fault (measurement error, handling error etc.) .