B1GG11K1 - 307 DW10TD ENGINE DW10ATED ENGINE

REMOVAL - REFITTING COOLANT PUMP

1 - REMOVAL

drain the cooling system .

remove the timing belt .

Remove the coolant pump (1) .

Retrieve the coolant pump seal .

2 - REFITTING

IMPERATIVE : always replace the coolant pump seal .

Clean the joint faces with an approved descaling product (Do not use sharp or abrasive tools) .

WARNING : the joint faces must not have any trace of knocks or scores .

Fit the pump (1) using a new seal .

Tighten the bolts (2) to 1.5 daN.m .

refit the timing belt .

fill and bleed the cooling system .