B1HG3AK1 - 307 DW10ATED ENGINE

REMOVAL - REFITTING ADDITIVE RESERVOIR

IMPERATIVE : before carrying out any work, put on goggles and gloves : blank the holes with the caps .

1 - REMOVAL

Place the vehicle on a lift .

Remove :

• {{n12517}} l'ecran gauche sous le reservoir a carburant (1)
• the heat shields (2)
• the securing clip 3

Disconnect :

• the connector (4)
• the click-on fitting (5)

IMPERATIVE : fit the plugs [1] - [2] - [3] on the unions immediately to prevent contamination of the additive circuit .

Detach :

• the handbrake cable (6)
• the pipe (7)

Detach ; The pipe (8) .

Remove the clips (9) .

{{N12518}} dégager le réservoir comme indiqué en (A) .

Remove the tank .

2 - REFITTING

Proceed in the reverse order to removal .