B2CK09K1 - 307 BE4R GEARBOX
CLEANING AND REFITTING CONDITIONS GEARBOX
Do not use abrasives or sharp tools on the joint faces
.
Clean the threads and taps
.
Fit only parts which are clean and free from faults (scores, burrs, knocks...)
.
Oil the parts one by one as they are refitted
.
Always renew after removal
:
-
the seals
-
the pins
-
the bearings
-
the shaft line tightening nuts
-
the differential crown wheel tightening bolts
-
the 5th speed gear thrust collar
-
the input shaft nut lock washer
Maintain the matching of
:
-
the clutch, gearbox and differential housings
-
the selection lever and shaft
-
the engagement finger and lever
-
the forks and shafts
Preliminary operations
:
-
operations which must be carried out before beginning the method
Complementary operation(s)
:
-
operations which must be carried out after completing the method in order to make the gearbox operational again