B3EG1AF1 - 307
REMOVAL - REFITTING STEERING LOCK
1 - TOOLING
[1] Set of extractors (Approval number 9776.AR) .
2 - REMOVAL
Disconnect the battery .
Remove the fuse box cover (1) and the trim (2) under the steering column unclipping them downwards .
remove the steering column bottom shroud .
Lift the upper cowling .
Detach the steering lock harness from the clip (3) .
Using a punch, mark the screw head (4) .
Using a drill 3 mm in diameter, drill the screw to a depth of 7 - 8 mm .
Using extractor no. 3, extract the bolt (4) .
Lift the brackets 2 and remove the transponder aerial (5) .
Place the key in the lock and turn it to the first position .
Using a screwdriver blade, press the pin (7) .
Detach the steering column lock .
Unclip :
Detach the steering lock harness (cut the retaining straps if necessary) .
Disconnect the connectors (8) - (11) .
Remove the steering lock harness and its harness .
3 - REFITTING
Proceed in the reverse order to removal .
Check the electrical and mechanical operation .