B3FB1BK1 - 307

DATA PEDAL BRACKET

1 - PEDAL BRACKET (LEFT HAND DRIVE)

The pedal bracket comprises the clutch and brake pedals .

This pedal bracket is mounted by studs (1) which are integral with the brake servo unit (2) sandwiching the bulkhead panel (3) .

The accelerator pedal is mounted on a shaft (4) screwed to the tunnel .

2 - PEDAL BRACKET (RIGHT HAND DRIVE)

The pedal bracket comprises the clutch brake and accelerator pedals .

The brake servo unit and tandem master cylinder are positioned on the left; a bar (5) transmits the force from the driver to the tandem master cylinder .

3 - PEDAL BRACKET (DRIVING SCHOOL)

The driving school pedal bracket uses the operating principle of the right hand and left hand drive pedal brackets; with bars transmitting the instructor's actions .

The instructor's clutch pedal is uncoupled from the learner's pedal; pedal assistance is provided on the learner's side .

The instructor's and learner's brake pedals are linked .

The instructor's accelerator pedal can be :

• retracted by means of a clip (6) so that the pedal can be concealed under the instrument panel
• coupled to the learner's accelerator pedal by means of a clip (7)

The height of the instructor's pedals can be adjusted .