C4AH1PF1 - 307

REPLACEMENT FRONT WHEEL ARCH

IMPERATIVE : THIS VEHICLE HAS BEEN DESIGNED USING THE MIG BRAZING PROCESS TECHNIQUE ; when the structure is repaired, all the connections concerned must be welded using the same procedure ; any other technique is prohibited .

WARNING : place the air bag in contact with the generator for safety reasons .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement ; PASSENGER COMPARTMENT SIDE FRONT STIFFENER .

Removal - refitting :

• half front suspension
• battery tray bracket
• control unit
• BUILT-IN SYSTEMS INTERFACE (BSI)

Detach the electrical harnesses from the abs .

2 - IDENTIFICATION OF REPLACEMENT PARTS

(1) Front wheel arch assembly .

(2) Front wing inner panel assembly .

(3) Upper front half panel assembly .

3 - COMPOSITION OF THE REPLACEMENT PARTS

(3) Upper front half panel assembly .

(4) Front wing bracket .

(5) Front wing inner panel .

(6) Front wheel arch .

(7) Suspension mounting .

(8) Wheel arch front part .

(9) Front wheel arch stiffener .

4 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

(1) Front wheel arch assembly .

(2) Pad material .

(3) Upper front half panel assembly .

5 - PREPARATION OF THE NEW PART

6 - CUTTING OUT

7 - SEPARATING

8 - ADJUSTMENT

9 - WELDING