C4CH2DF1 - 307

REPLACEMENT INNER SILL

IMPERATIVE : THIS VEHICLE HAS BEEN DESIGNED USING THE MIG BRAZING PROCESS TECHNIQUE ; when the structure is repaired, all the connections concerned must be welded using the same procedure ; any other technique is prohibited .

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement :

• SILL WEB
• centre pillar stiffener (5 door)
• 'C' post stiffener (3 door)
• a post stiffener

2 - IDENTIFICATION OF REPLACEMENT PARTS

(1) Inner sill .

(2) Rear wing inner panel front closer .

3 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

(1) Inner sill .

(2) Rear wing inner panel front closer .

4 - CUTTING OUT

5 - RELEASING

6 - ADJUSTMENT

7 - WELDING

8 - PROTECTION