C5EG0WF1 - 307

REMOVAL - REFITTING HEADLIGHT

1 - REMOVAL

REMOVE THE FRONT BUMPER .

Disconnect the headlamp harness .

On the left-hand side :

• remove the clips (1)
• detach the air inlet manifold (2)

Unclip the headlamp wash actuator from the headlight ( According to specification) .

Remove the fasteners (3) .

Remove the headlamp (4) .

2 - REFITTING

ADJUST THE CLEARANCES AND FLUSH FITTING : Before tightening the fixings (3) .

Proceed in the reverse order to removal .

Check the electrical operation .

FIT THE BUMPER .