C5JG27F1 - 307

REMOVAL - REFITTING DRIVER'S AIR BAG

1 - REMOVAL

NOTE : the rotary switch is an integral part of the assembly COM 2000 .

APPLY THE PROCEDURE FOR SWITCHING OFF THE CENTRAL AIRBAG SYSTEM .

Place a screwdriver in the side holes of the steering wheel (A) and press to unclip the air bag towards (B) .

Disconnect the air bag connectors and remove the air bag .

2 - REFITTING

Connect the connectors .

Fit the air bag and press on it to clip it .

APPLY THE PROCEDURE FOR SWITCHING ON THE CENTRAL AIRBAG SYSTEM .

Check the electrical operation .