A--T0MK1 - 607

MODIFICATION LION BADGE ON THE BOOT LID

From build code 863889 : Discontinuation of the 4 centring pins on the lion badge of the boot lid .

1 - IDENTIFICATION

A : Old lion badge fitted with 4 centring pins (1) with adhesive .

B : New lion badge with adhesive .

2 - BONDING OF THE LION BADGE

WARNING : on the old boot lid, fill the securing holes with sealing compound BUTIL M 110 before sticking the new lion badge .

Position and stick 2 strips of adhesive tape (C) - (D) .

Make a mark (E) indicating the centre line of the boot lid on the upper strip (C) .

Degrease the area where the lion is to be stuck on .

Position the lion badge opposite the mark (E) and align the bottom of it on the upper line of the adhesive tape (D) .

Stick on the lion badge .

Remove the 2 strips of adhesive tape (C) - (D) .

3 - INTERCHANGEABILITY

When stocks are exhausted, Parts Division will only supply new specification parts .