B1GB0MK1 - 607 ES9J4S ENGINE EW12J4 ENGINE DW12TED4 ENGINE ML5T GEARBOX
DATA - IDENTIFICATION COOLING SYSTEM
1 - IDENTIFICATION
ES9J4S ENGINE
Diagram of cooling circuit for the ES9J4S engine .
(1) Radiator .
(2) Coolant inlet manifold .
(3) Coolant pump .
(4) Expansion chamber .
(5) Water outlet housing .
(6) Bleed screw .
(7) Water/fluid heat exchanger : Engine .
(8) Automatic gearbox heat exchanger .
EW12J4 ENGINE
Diagram of cooling circuit for the EW12J4 engine .
(1) Radiator .
(2) Coolant inlet manifold .
(3) Coolant pump .
(4) Expansion chamber .
(5) Water outlet housing .
(6) Bleed screw .
(7) Water/fluid heat exchanger : Engine .
(8) Automatic gearbox heat exchanger .
(9) Bubble trap .
DW12TED4 ENGINE ML5T GEARBOX
Diagram of cooling circuit for the DW12TED4 engine (Manual gearbox) .
(1) Radiator .
(2) Coolant inlet manifold .
(3) Coolant pump .
(4) Expansion chamber .
(5) Water outlet housing .
(6) Bleed screw : Heater matrix .
(7) Water/fluid heat exchanger : Engine .
(8) EGR intercooler .
ALL MODELS
2 - DATA
| cooling system | |||
|---|---|---|---|
| engine code | 3FZ | XFX | 4HX |
| special features | without | ||
| capacity : litre(s) | 6 | UNK. | 7.5 |
| pressurisation : bar(s) | 1.4 | ||
| thermostat (°C) start of opening | 89° | 78° | 83° |
| power of fans (W) | 450 W | ||
| fan(s) controlled by | injection control unit | ||
| warning temperature (°C) | 118° | ||
| engagement temperature (°C) stage 1 | 97° | ||
| engagement temperature (°C) stage 2 | 101° | ||
| engagement temperature (°C) stage 3 | 105° | ||
| engagement temperature (°C) post ventilation |
105° 6 minute(s) |
||
| oil/coolant cooler, number of blades | 4 blades | 12 blades | |