B1HG2LK1 - 607 ES9J4S ENGINE EW12J4 ENGINE

REMOVAL - REFITTING FUEL FILTER

1 - TOOLS REQUIRED

[1] Pipe with adapter for valve SHRADER (-).0141-T1 .

2 - REMOVAL

Lower the fuel pressure by connecting the end of the tool [1] to the valve SHARADER; catch the fuel in a receptacle .

Pull the tie wrap (1) to release the filter .

Disconnect the filter input (2) and output (3) click-on connectors .

Remove the fuel filter .

3 - REFITTING

Before refitting the click-on union, ensure that the fuel pipe is clean and in perfect condition in the area of the seal bearing .

Reconnect the input (2) and output (3) click-on connectors observing the correct direction for fitting the filter .

Refit the tie wrap .