B2BJ01K1 - 607 ML5T GEARBOX

DISMANTLING - ASSEMBLY CLUTCH HOUSING (SECOND ASSEMBLY)

1 - CLUTCH RELEASE BEARING GUIDE REMOVAL-REFITTING

Remove :

• the bolts (1)
• the clutch release bearing guide (2)

Fit the stop guide (2) .

Tighten the bolts (1) to 2 daN.m .

2 - CLUTCH FORK SHAFT AND BEARING REMOVAL

Remove the bearing (3) by pressing on the 2 tongues (4-5) .

Remove :

• the clutch fork shaft (6)
• the fork (7)
• .the bottom bearing (8)

3 - FITTING THE CLUTCH FORK AND FORK SHAFT BEARINGS

Fit :

• the bearing (8) without greasing it

NOTE : grease the clutch fork bushes with MOLYKOTE grease BR2+ .

Fit :

• the fork (7)
• the clutch fork shaft (6)
• the bearing (3)