B2CB1NK1 - 607 4HP20 AUTOMATIC GEARBOX

PRECAUTIONS TO BE TAKEN AUTOMATIC GEARBOX

1 - MECHANICAL

Never place the gearbox on the ground without protection .

Never use the connectors as a handle for lifting, turning, holding or pushing the gearbox .

Always fit the converter support pin when the automatic gearbox is removed .

Remove the pin just before lining up the engine and the automatic gearbox .

Always use the centralising pin to line up the engine and the automatic gearbox .

2 - ELECTRICAL SYSTEM

Do not disconnect :

• the battery with the engine running
• the control unit with ignition on

Before re-connecting a connector, check :

• the condition of the various contacts (distortion, corrosion etc.)
• the presence and condition of the connector locking mechanism

During electrical checks :

• the battery must be fully charged
• never use a voltage source higher than 16 V
• never use a test lamp