B2CQ03K1 - 607 4HP20 AUTOMATIC GEARBOX

PRESENTATION TOOLING DRIVE SHAFTS

[1] Pin for lining up (-).0338-A automatic gearbox .

[2] Handles for removal/refitting of the converter (-).0338-B (Quantity 2) .

[3] Converter housing lip seal fitting drift (-).0338-F .

[4] Converter lip seal extraction hook (-).0338-G .

[5] Right-hand drive shaft seal extractor (-).0338-C .

[6] Ball joint extractor (-).0338-E .

[7] Drive shaft seal fitting drift (-).0338-H1 (left side) .

[8] Left-hand drive shaft seal fitting guide (-).0338-H2 .

[9] Drive shaft seal fitting drift (-).0338-J1 (right side) .

[10] Right-hand drive shaft seal fitting guide (-).0338-J2 .

[11] Gear change shaft seal fitting drift (-).0338-K .

[12] Locking screw (-).0338-M1 .

[13] Fork ball insert adjustment shim (-).0338-M2 .

[14] Gear change shaft seal scraper (-).0338-N1 .

[15] Gear change shaft seal extractor(-).0338-N2 .

[16] Automatic gearbox mounting shaft removal/fitting socket (-).0338-P .

[17] Protective plug(s) for casing and heat exchanger (-).0338-R .

[18] Converter retaining clip (-).0338-U (EW10) .

[18] Converter retaining clip (-).0338-V (For 307) .

[19] Converter support pin (-).0338-D (XU) .

[20] Converter support pin (-).0338-S (TU) .

[21] Power train support crossmember (-).0009 .

[22] Filling cylinder (-).0341 .

[23] Drain plug spanner (-).1402 .

[24] Test harness (-).0338-L .

[25] Pliers for cooling circuit spring clips (-).0165 .

[26] Hub locking tool (-).0606-AY .

[27] Ball joint extractor (-).0709 .

[28] Lever for uncoupling pivot ball joints (-).0622 .

[29] ] hose clamp (-).1512 (Quantity 2) .

[30] Workshop hoist .

[31] Lifting chain (-).0102-M .

[32] Shackles (Quantity 2) .

[33] Power train support crossmember (-).0011 .

[34] Set of 2 spring retaining rods (-).918-Z .

[35] Locking tool (-).0313-C .

[36] fitting drift for final drive right-hand output oil seal (-).0317-U .

[37] fitting drift for final drive left-hand output oil seal (-).0317-T .