B3DB09K1 - 607
DATA - TIGHTENING TORQUE(S) REAR SUSPENSION
1 - DATA
1 - 1 - REAR ANTI-ROLL BAR
| engine code | 3FZ - XFX - 4HX - 4HZ |
|---|---|
| anti-roll bar diameter (mm) |
25 |
1 - 2 - REAR SUSPENSION GEOMETRY
| engine code | 3FZ - 4HX - 4HZ - XFX | 3FZ - 4HX - 4HZ - XFX |
|---|---|---|
| special features | tyres 225/55 R16 |
tyres 225/50 R17 |
| H2 / H3 (mm) | 134/86 | 142/92 |
| camber | -1° 18' ± 30' | -1° 18' ± 30' |
| track / wheel H2 (mm) | +2,2 ± 0,5 | +2,2 ± 0,5 |
| track / wheel H3 (mm) | +3,5 ± 0,5 | +3,5 ± 0,5 |
| track / wheel H2 + 50 mm | +1,5 ± 0,5 | +1,5 ± 0,5 |
| track : (+ toe-in ) (- toe-out) these values are for a reference height (H2) wheel center line/ground height (H3) |
||
(H2) Height from ground to rear jacking point, at reference height .
2 - TIGHTENING TORQUE(S)
| reference/ description | tightening torque(s) (da.Nm) |
|---|---|
| (1) bolt(s) securing the rear crossmember to the body | 6.5 |
| (2) bolt(s) securing the rear upper arm to the crossmember | 4 |
| (3) bolt(s) securing the rear upper arm to the pivot | 5.5 |
| (4) rear hub fixing (previously greased) | 30 |
| (5) fixing bolt securing the lower arm or rear wishbone onto the rear crossmember | 4 |
| (6) fixing securing the rear shock absorber onto the arm or pivot | 8.5 |
| (7) mounting nut securing the shock absorber onto the body or crossmember | 4 |
| (8) mounting nut securing the connecting rod onto the anti-roll bar or onto the wishbone | 5.7 |
| (9) anti-roll bar bush yoke fixing | 2.5 |
| (10) clamp connecting rod mounting nut (on the crossmember) |
4 |
| (11) clamp connecting rod mounting nut (on the pivot) |
5.5 |