B3DG0WK1 - 607

REMOVAL - REFITTING CLAMP CONNECTING ROD

1 - REMOVAL

Remove the wheel .

Remove the clip retaining the handbrake cable (1) .

Remove :

• the cam ring (2)
• the cam ring (3)
• the track control lever

2 - REFITTING

Refit the track control lever (without tightening) .

Clean and grease the cam rings .

Position the cam rings (items and A vertically) .

Check that the centering pin (4) is correctly positioned .

Slightly tighten the bolts (5) - (6) (Without changing the position of the cam rings) .

Refit the clip (1) .

Adjust the rear suspension .

Tightening torque(s) :

• the bolt (5) to 5.5 da.Nm
• the bolt (6) to 3.5 da.Nm
• the wheel to 9 da.Nm