B3DT05K1 - 607

FITTING REAR SUSPENSION UNITS COMPRESSION TOOL

1 - SPECIAL TOOLS

[1] 2 rear spring compression cups (-).0915-D7 .

[2] 2 support rings (-).0915-D8 .

[3] Rear suspension units compression tool (-).0915-D .

2 - FITTING

Position the support ring [2] on tool [3] .

Turn tool [3] a 1/4 turn after its engagement in the support ring [2] .

Place tool [3] inside the spring .

Place the cup between the 3rd and 4th spring coil from the top .

Slide the cup [1] on the spring to position it between the 2nd and 3rd spring coil .

Position tab (a) of plate [3a] of equipment [3] in the cut-out of the lower wishbone .

Compress the spring until the rear spring support is no longer in contact with the body .