C4AB0EF1 - 607
IDENTIFICATION, LEFT FRONT BLOCK
NOTE : unless otherwise stated, all the parts are galvanized both sides .
| reference \ description | part with part number | thickness | comment(s) |
|---|---|---|---|
| (1) suspension mounting | no | 2.44 | - |
| (2) suspension bracket stiffener | no | 1.17 | |
| (3) suspension bracket stiffener | no | 2.93 | |
| (4) front wheel arch | yes | 0.67 | |
| (5) bonnet strut support | yes | 1.47 | |
| (6) lower front half-panel | yes | 0.77 | |
| (7) horn bracket | no | 1.47 | |
| (8) lower front half panel assembly | yes | - | 6+7 |
| (9) chassis leg front closing panel | no | 0.97 | high strength steel |
| (10) brake hose bracket | no | 2.44 | - |
| (11) chassis leg assembly front closer | yes | - | 9+10 |
| (12) front wheel arch assembly | yes | - | 1+2+3+4+5+8+11 |
| (13) chassis leg link | yes | 0.98 | - |
| (14) chassis leg link | yes | 2.44 |
NOTE : unless otherwise stated, all the parts are galvanized both sides .
| reference \ description | part with part number | thickness | comment(s) |
|---|---|---|---|
| (15) impact absorber support | yes | 2.44 | - |
| (16) front wing inner panel | no | 0.77 | high strength steel |
| (17) bonnet frame stiffener | no | 1.95 | - |
| (18) wiring housing bracket | no | 0.97 | |
| (19) hydraulic block pre-charge pump bracket | no | 1.95 | |
| (20) front wing inner panel assembly | yes | - | 16+17+18+19 |
| (21) upper front half panel assembly | yes | 0.77 | - |
| (22) front panel support | no | 0.97 | |
| (23) front engine sub-frame securing bracket assembly | no | 1.95 | |
| (24) panel support assembly | yes | - | 22+23 |
| (25) front chassis leg | no | 1.47 | - |
| (26) rear engine sub-frame tie bar bracket | no | 2.44 | |
| (27) chassis leg front partition | no | 1.50 | |
| (28) centre partition | no | 1.47 | |
| (29) web | no | 1.17 | |
| (30) rear partition | no | 1.47 | |
| (31) chassis leg front stiffener | no | 1.17 | |
| (32) chassis leg upper stiffener | no | 1.50 | |
| (33) chassis leg lower stiffener | no | 1.47 | |
| (34) front LH chassis leg assembly | yes | - | 25+26+27+28+29+30+31+32+33 |
| (35) front chassis leg stiffener | yes | 1.47 | - |
| (36) engine sub-frame rear securing bracket | no | 1.47 | |
| (37) engine sub-frame securing plate | no | 1.95 | |
| (38) towing eye | no | 1.95 | |
| (39) engine sub-frame securing plate assembly | yes | - | 36+37+38 |
| (40) engine sub-frame securing stiffener | yes | 1.95 | - |
| (41) front half-panel assembly | yes | - | 12+13+14+15+20+24+34+35+39+40 |