C4AH1HF1 - 607
REPLACEMENT FRONT BUMPER SPOILERS
1 - REMOVAL
Place the vehicle on a lift .
Remove :
Using a flat tool (1), move aside the clips (2) .
Detach the spoilers (3) from the bumper (4), then remove them .
Using a screwdriver detach the clips (2) from the bumper .
2 - REFITTING
Mark then identify the drill holes (10 holes) on the spoilers, starting with the existing securing hole .
Drill the spoilers to a diameter of 4,2 mm .
Align the spoilers on the bumper and keep them in position using clamps (5) .
Identify the drill holes (6) .
Drill holes in the bumper to a diameter of 4,2 mm (Following the line(s) (6) ) .
Position bolt plates (7) (part no. 6985.15) and flanged nuts (8) (part no. 6936.95) (As indicated) .
Tighten the nuts (8) .
Continue the fitting operations in the reverse order to removal .