C4BG0XK1 - 607

REMOVAL - REFITTING BOOT PUSH BUTTON

1 - REMOVAL

Remove the fasteners (1) .

Remove the trim (2) at the top .

Detach the lining (2) from the swan necks .

Remove the trim (2) .

Unclip the assembly (3) on the interior side .

Press the button (4) from the outside in order to free the assembly (3) .

Detach the assembly via the inner panel .

Disconnect the connector (5) .

Remove the push button assembly .

2 - REFITTING

Proceed in the reverse order to removal .

Check operation .