C4BH2NF1 - 607

REAR WING INNER PANEL RELACEMENT ASSEMBLY

WARNING : all the scoured areas must be protected by the approved electrolytic re-zincing process .

IMPERATIVE : observe elementary health and safety rules (wearing of filter mask for organic fumes - work in a ventilated area) .

1 - COMPLEMENTARY OPERATION(S)

Replacement, Rear wing .

2 - IDENTIFICATION OF REPLACEMENT PARTS

3 - COMPOSITION OF THE REPLACEMENT PARTS

(1)Rear wheel arch .

(2) Lower stiffener .

(3) Front stiffener .

(4) Rear stiffener .

(5) Rear upper stiffener .

(6) Rear quarter panel lower partition .

(7) Wing inner panel (rear section) .

(8) Wing inner panel (front section) .

(9) Rear post partition .

(10) Rear quarter panel inner panel .

(11) Rear quarter panel upper stiffener .

(12) Rear screen lower crossmember .

(13) Side parcel tray .

(14) Frame covering .

(15) Backrest abutment .

(16) Rear seat-back fastener hook .

(17) Lower boot strut bracket .

4 - PART(S) REQUIRED TO CARRY OUT THE OPERATION

5 - PREPARATION OF THE NEW PART

6 - CUTTING OUT

7 - RELEASING

8 - ADJUSTMENT

9 - WELDING

10 - SEALING