C4CC01K1 - 607

REPLACEMENT BODY WAIST LEVEL PROTECTORS

1 - REMOVAL

1 - 1 - REMOVAL OF FRONT WING PROTECTOR

Using a spatula (1), raise and unclip the wing protector (A) to remove it .

Using pliers detach the clips by turning a quarter turn .

1 - 2 - REMOVAL OF FRONT DOOR PROTECTOR

Using a spatula (1), gradually raise and unclip the front door protector (B) .

Remove the protector .

Using pliers detach the clips from the door panel by turning a quarter turn .

1 - 3 - REMOVAL OF REAR DOOR PROTECTOR

Using a spatula, gradually raise and unclip the rear door protector (1) .

Remove the protector .

Using pliers detach the clips from the door panel by turning a quarter turn .

2 - REFITTING

IMPERATIVE : replace the damaged clips .

Locate the clips on the protector, and refit starting with the indexing pin at the front door edge .

Position the protector and clip in succession the clips in the punched holes by pressing each clip .