C4CG1GK1 - 607

REMOVAL - REFITTING ANTI-DIRT SEAL

1 - TOOLING

[1] Tool for positioning the seal nipple (Workshop reference (-).1349-B ) .

2 - REMOVAL

Unclip the pin (1) .

Using a spatula, gradually remove the seal retaining fittings (2) .

3 - REFITTING

Clean the surfaces .

Fit the seal with new pins .

Clip the seal gradually starting at the front .

Using the tool [1], Engage the dirt excluder nipple in order to refit it on the lower part .