C4CH1QF1 - 607

REMOVAL - REFITTING GLUED SEAL ON FRONT AND REAR DOORS

1 - REMOVAL

Remove :

• THE ASSEMBLED DOOR
• FRONT DOOR TRIM PANEL or REAR DOOR TRIM PANEL
• THE FRONT DOOR FRAME INTERIOR TRIM or THE REAR DOOR FRAME INTERIOR TRIM

Gradually detach the seal from the door panel .

Remove the door panel seal .

2 - REFITTING

A - Front door .

B - Rear door .

Clean the contact area on the door surround .

Detach the film protecting the seal .

Position the seal (1) following the mark (2) starting from the top corner .

Position the seal without pulling it, to avoid stretching it, following the outline of the stamped section, ending at the lower section .

Using a spatula press firmly on the internal lip of the seal (1) to ensure that the edge is stuck correctly .

Proceed in the reverse order to removal .