C4GB06F1 - 607

IDENTIFICATION OF THE SYMBOLS USED IN THE BODYWORK PROCEDURES

(1) Transfer to the bench with mechanical parts .

(2) Transfer to the bench without mechanical parts .

(3) Transfer to the bench without front mechanical parts .

(4) Transfer to the bench without rear mechanical parts .

(5) Cutting out .

(6) Drilling .

(7) Milling .

(8) Separating .

(9) MIG plug welding or resistance welding .

(10) Seam welding .

(11) Brush smoothed mastic .

(12) Packing mastic ø 13 mm .

(13) Packing mastic ø 6 mm .

(14) Strip mastic 2 x 20 .

(15) Structural adhesive .

(16) Lead loading .

(17) Protection of hollow bodies .

(18) Anti-chip compound .

(19) Expanding foam .

(20) Finishing mastic .

(21) Symmetrical operation(s) .

(21) Check visually or manually .

(23) Fitting .

(24) Removal .

(25) Removal - refitting .

(26) Access from the interior .

[1] Grinding wheel, Cutting out .

[2] Grinding wheel, Grinding .

[3] Drill .

[4] Electric knife .

[5] Provisional cut .

[6] Final cut .

[7] Spot weld removal drill bit .

[8] Scribing iron .

[9] Checking pin .

[10] Trace by overlay .

[11] Flexible disc .

[12] Resistance welding .

[13] Spot welding or bead welding .

[14] Cupro-soldering spot or bead welding .

[15] Soldering .

[16] Tin plating .

[17] Application of air-dried coating .

[18] Application of coating to be smoothed by brush .

[19] Anti-chip compound .

[20] Box sections .