C5DG0HF1 - 607

REMOVAL - REFITTING RAIN SENSOR

1 - TOOLING

[1] Rain sensor refitting tool, Workshop reference (-).1349-C .

2 - REMOVAL

Remove the interior mirror and its bracket .

Disconnect the connector (1) .

Using a screwdriver, unclip the sensor (2) .

Remove the rain sensor (2) .

3 - REFITTING

Place the new sensor and its protector in the tool [1] .

Detach the protector (3) by unclipping the retaining brackets .

Position the tool [1] and the sensor on the support ring (4) indexed by the connector .

Push the tool [1] in order to push the sensor on the support ring .

Detach the tool [1] .

Check the clipping of the sensor by hand .

Re-connect the connector (1) .

Refit the mirror and its support .