C5EG0FF1 - 607

REMOVAL - REFITTING HEADLAMP LEVELLING CONTROL

1 - REMOVAL

Disconnect the headlamp .

On the right-hand side : Remove the fitting on the expansion bottle and dislodge the flexible fastener of the solenoid valve to detach the headlamp surround .

On the left-hand side : Remove the battery and the front wall of the battery tray to detach the headlamp surround .

Using a blade, raise the locking tab (A) .

Pivot the actuator (1) clockwise and dislodge it from its housing .

Using a spatula, lever to detach the ball joint from the headlamp mechanism .

Remove the actuator (1) .

2 - REFITTING

Using the bolt (B), adjust the ball joint to the home position and lock the actuator (C) on the headlamp .

Introduce a spatula into the headlamp and tilt downwards to clip the ball joint in the actuator (1) .

Proceed in the reverse order to removal .

Check the operation .