C5EG0GF1 - 607

REMOVAL - REFITTING XENON DISCHARGE LAMP

1 - REMOVAL

Disconnect the headlamp .

On the right-hand side : Remove the fitting on the expansion bottle and dislodge the flexible fastener of the solenoid valve to detach the headlamp surround .

On the left-hand side : Remove the battery and the front wall of the battery tray to detach the headlamp surround .

Release the cover (1) and remove it .

Press the connecting shaft (2) and pivot it 30° downwards to release it .

Then pull the shaft outwards and let it hang .

Press the retaining clip (3) to release it from the panel (4) and tilt the clip downwards .

Detach the xenon discharge lamp (5) from the lugs (A), (B) and the panel (4) .

Remove the xenon discharge lamp (5) .

2 - REFITTING

WARNING : the position of the lamp on the bracket is maintained by the 2 positioning lugs (A), (B) .

Proceed in the reverse order to removal .

Check the operation and setting of the headlamp (adjust if necessary) .