C5EG0SK1 - 607

REMOVAL - REFITTING STOP LAMP SWITCH

1 - REMOVAL

Switch off the ignition .

Remove the trim under the fascia .

Disconnect the connectors (1) , (2) .

Remove the switch (3), (4) by pulling it .

2 - REFITTING

NOTE : carry out the operation with the 2 switches at the same time .

Re-connect the connectors (1), (2) .

Press the brake pedal by hand .

Insert the switch (3), (4) fully into its bracket .

Push the brake pedal to its stop by hand .

The switch (3), (4) must return with the pedal; this is the adjustment method .

Fit the trim under the fascia .

Switch on the ignition .

Check the lighting of the brake lights .