C5GH0UF1 - 607

REPLACEMENT REAR SEAT BACK REST COVER

1 - TOOLING

[1] Chisel sharpened to an angle of 30 ° .

2 - REMOVAL

Remove :

• the rear head restraint
• THE REAR SEAT
• THE RIGHT AND LEFT CASINGS
• THE REAR SEAT BACK REST
• THE REAR CENTRAL ARMREST

Using a spatula (1), unclip the seat back cover (2) around the edge .

Using the tool [1], cut the rivet heads (3) .

Remove the flap support (4) .

Cut the clips (5) .

Detach the cover / padding assembly .

Press on the lugs (A) to detach the head restraint guides (6) upwards .

Remove :

• the head restraint guides
• the cover / padding assembly

Gradually detach the cover and cut the clips (7) to release the cover from the padding .

Remove the cover .

3 - REFITTING

Make sure the return rods are in the cover .

Proceed in the reverse order to removal .