C5HG0DF1 - 607 DW12TED4 ENGINE

REMOVAL - REFITTING : ADDITIONAL HEATER/AIR CONDITIONING RESISTOR

1 - REMOVAL

Remove (On the driver's side) :

• the trim below the fascia
• the console flange

Remove the fitting (1) from the connector bracket (2) .

Detach the connector bracket (2) upwards .

Disconnect :

• the earth lead (3)
• the supply harness (4)

Remove :

• the fasteners (5)
• the heater resistor (6)

WARNING : take out the resistor carefully to avoid damaging the heater matrix .

2 - REFITTING

Proceed in the reverse order to removal .

WARNING : refit the resistor carefully to avoid damaging the heater matrix .