E4AK00K1 - 607

BODYWORK DEPROTECTION PRODUCTS MARKETED BY PARTS DIVISION

IMPERATIVE : only these products, which have received technical approval, are to be used .

IMPERATIVE : these are the best possible products for removing wax from new vehicles, as they are guaranteed not to cause any damage, such as discoloration, pitting of chrome plating, or staining of the final coat of paint .

1 - DEPROTECTION RANGE

1 - 1 - PREPARATION OF THE DEPROTECTION SOLUTION

15 % diluted in water, to the maximum amount (i.e. 1 litre(s) of the product to 6 litre(s) of water) .

In cold weather, lukewarm water may be used, up to 40 ° C maximum .

1 - 2 - PRODUCT SPRAYING

Spray the solution onto the whole of the vehicle, starting with the lowest parts, then the horizontal parts .

Leave to act for 3 to 6 minutes .

During this stage wetting of the vehicle must be continuous; this may require several fresh applications of the solution in patches which dry quickly .

1 - 3 - RINSING

Carefully rinse with plenty of cold or lukewarm water (40 ° C maximum) with a jet or high pressure hose .

1 - 4 - TRACES OF RESIDUAL VARNISH ON THE BODYWORK

Slight, not very extensive traces can be removed using a soft cloth soaked with diluted deprotection product (rub the bodywork lightly) .

If there is a significant amount of residue left, repeat the deprotection operation .

WARNING : it is strictly prohibited to remove wax using heat .