C4CG1SK1 - 607

REMOVAL - REFITTING FRONT DOOR TRIM PANEL

1 - SPECIAL TOOLS

[1] Trim pliers (-).1311 .

2 - REMOVAL

Disconnect the battery .

2 - 1 - ON THE RIGHT-HAND SIDE

Remove :

• the handle trim (1)
• the fasteners (2)

2 - 2 - ON THE LEFT-HAND SIDE

Remove the cover (3) .

Remove the fastener (4) .

MEMORY SEAT

Using a screwdriver blade, gently unclip the trim (5) from the interior opening control .

Disconnect the connector (6) for memorising the electric seat .

Remove the finisher (5) .

ALL MODELS

Detach the window control (7) .

Disconnect the 2 connectors (8) .

Remove the window control (7) .

2 - 3 - ON BOTH SIDES

Remove the light from the bottom of the trim panel, using a flat screwdriver blade .

Using the tool [1], unclip the trim panel at (A), (B), (C) .

Then pull the rear top part of the trim panel (9) to unclip it, then continue towards the front to release it from the interior weatherstrip and the interior opening control (10) .

2 - 4 - ON THE RIGHT-HAND SIDE

Disconnect the window connector .

Remove the door trim pad .

3 - REFITTING

Proceed in the reverse order to removal .

Connect the battery .

Check : The electrical operation .