B3EF04K1 - 307

ADJUSTMENT STEERING MECHANISM DAMPER

1 - SPECIAL TOOLS

[1] 18 mm/flat hexagonal recess (-).0720-G .

2 - ADJUSTMENT

Make the marks (A) - (B) on the steering rack .

Make the mark (C) on the cap (1) coinciding with the mark (A) .

Using the tool [1], slacken the cap (1) until the mark (C) coincides with the mark (B) .

Lock the cap (1) in relation to the steering rack, using a pin .

Move the rack through its travel 3 times from stop to stop .

Check there is no tight spot throughout the ram travel .

Position the rack at the mid-point .

REFIT THE STEERING MECHANISM .