B2GB0BK1 - 607

WHEELS AND TYRES

1 - IDENTIFICATION

Model :

2 - DATA

2 - 1 - PRODUCTION FIT

tyres
(1) petrol (all models)
(2) diesel(excluding france and overseas territories)
(up to build code 874989)
(3) diesel (france and overseas territories)
Diesel
excluding france and overseas territories
(from build code 875089)
type of wheel rim FELINE VIVACE MARGUERITE FELINE
wheel rim mark 7,5J17 CH 5-45 7J16 CH 5-39 7J16 CH 5-39 7,5J17 CH 5-45
tyre size 225/50 R 17 225/55 R 16 225/55 R 17 225/50 R 17
MICHELIN MMX3 MXM(*) MXM MMX3
PIRELLI P6000 P6000 - P6000
front pressure, empty/fully loaded (bars) 2.3/2.3 2.3/2.3 2.5/2.5 2.3/2.3
rear pressure, empty/fully loaded (bars) 2.3/3.2 2.3/3.2 2.5/3.2 2.3/3.2
(*) the vehicles have been fitted with tyres MICHELIN Primacy
(up to build code 874989)

From build code 870189 : THE WHEELS ARE SECURED BY MIXED BOLTS .

2 - 2 - WINTER FITMENT

tyres
engine code
description XFX
RFN
RHZ
4HX
3FZ
XFX
RFN
RHZ
4HX
3FZ
RFN
RHZ
4HX
3FZ
RFN
RHZ
4HX
3FZ
tyre size 225/55 R 16 225/50 R 17 225/55 R 16 225/55 R 16
wheel reference VIVACE FELINE steel wheel MARGUERITE
type of wheel rim 7J16 CH 5-39 7,5J17 CH 5-45 7J16 H2 5-39 7J16 CH 5-39
CONTINENTAL TS790 - TS790 TS790
MICHELIN PILOT ALPIN PILOT ALPIN PILOT ALPIN PILOT ALPIN
PIRELLI SNOWSPORT SNOWSPORT SNOWSPORT SNOWSPORT
front pressure, empty/fully loaded (bars) 2.3/2.3 2.3/2.3 2.3/2.3 2.5/2.5
rear pressure, empty/fully loaded (bars) 2.3/3.2 2.3/3.2 2.3/3.2 2.5/3.2
the winter tyres indicated are those available from the manufacturers

IMPERATIVE : RFN - 3FZ engines : the wheel MARGUERITE must never be used with summer tyres .

Steel wheel :

IMPERATIVE : with this wheel, it is necessary to fit: wheel bolts (part number 5405.55) and a trim (part number 9606.PX) .

Snow chains :

3 - UNDER INFLATION DETECTION

3 - 1 - WINTER WHEELS (STEEL)

IMPERATIVE : the pressure sensor for aluminium wheel part number 5430.02 must not be fitted to steel wheels; use a conventional valve ; in this case : the tyre under-inflation detection function must be switched off by modifying the configuration of the bsi by means of the configuration procedure .

3 - 2 - WINTER WHEELS (ALUMINIUM)

If the wheels are fitted with new pressure sensors ; The new sensors must be programmed using the tool DIAG 2000 and the tool PROTOCTAIR (-).1244-B to force the transmission from the pressure sensors .

4 - CONFIGURATION OF THE TYRE SIZES IN THE ABS OR ESP ECU

WARNING : if the tyre size is changed, modify the tyre size in the abs or esp ecu by configuration .

5 - TIGHTENING TORQUE(S)

Wheel bolts : 9 da.Nm .

Pressure sensor : 0,425 ± 0,075 da.Nm .