B3FG1RK1 - 607

REMOVAL - REFITTING FRONT BRAKE CALIPERS (BREMBO CALIPER)

1 - REMOVAL

Disconnect the brake pad wear warning leads .

Disconnect the hose connector (1) from the rigid brake pipes (2) .

Recover the U clip (3) .

Plug the brake hoses (1), (2) .

Remove the brake hose (1) .

Remove :

• the bolts (4)
• the caliper (5)

NOTE : clean the caliper threads, using a thread cutter (M12 X 150) or a lode .

2 - REFITTING

Visually check :

• the sealing of the piston
• THE DISC FOR WEAR

Refit the brake caliper .

Fit 2 new bolts (4) (coated with threadlock)) .

Tighten the bolts (4) to 11 daN.m .

Fit, The brake hose to the caliper : Tightening torque 1,5 da.Nm .

IMPERATIVE : route and clip exactly as before .

WARNING : take care not the twist the brake hose .

Fit, The brake hose to the rigid pipe (2) : Tightening torque 1,5 da.Nm .

Reconnect the brake pad wear warning leads .

FILL AND BLEED THE BRAKE CIRCUIT .