C4CG1FK1 - 607

REMOVAL - REFITTING DOOR OPENING PLATE

1 - REMOVAL

Remove the door trim pad (FRONT DOOR) Or (REAR DOOR) .

Driver's door : REMOVE THE BOLT AND ITS BRACKET .

Carefully detach the sealing film at the rear .

Using a screwdriver blade, unclip the plate (1) .

Release the outside opening control (2) via the indentation on the panel .

Using a screwdriver flat blade, unclip the link rod (3) on the outside handle .

Remove : The outside control (2) of the door opening .

2 - REFITTING

Put the control (2) back in place .

Re-clip the rod (3) .

IMPERATIVE : retrieve the rivets which have fallen in the base of the door .

Proceed in the reverse order to removal .

IMPERATIVE : IF THE SEALING SHEET IS TORN, REPLACE IT .

Check the operation .