C4CG20K1 - 607

REMOVAL - REFITTING REAR DOOR APERTURE SEAL

1 - REMOVAL

Remove :

• THE CENTRE PILLAR UPPER TRIM
• THE REAR SIDE SILL TRIM
• THE CENTRE PILLAR LOWER TRIM

Pull on, then detach the seal around the door opening .

2 - REFITTING

Identification marks :

• front right door seal (coloured white)
• front left door seal (coloured yellow)

Position the colour mark in the upper front corner (1) .

Distribute the seal in loops (2) on the flange .

Fit with a mallet on the roof side (3) .

Fitting using a mallet rear wing side (4) .

Fit with a mallet on the centre pillar side (5) .

Finish the fitting on the sill (6) side .

Proceed in the reverse order to removal .