C5DG0KF1 - 607

REMOVAL - REFITTING REAR SCREEN ELECTRIC BLIND

1 - REMOVAL

REMOVE THE REAR SHELF TRIM .

Turn the trim panel over .

Remove the fasteners (1) .

Detach the harness (2) from the wire attachments (3) .

IMPERATIVE : open the blind electrically as above to detach it from the trim without damaging it .

Remove the electric blind (4) .

2 - REFITTING

IMPERATIVE : open the blind electrically as above to refit it on the trim without damaging it .

Proceed in the reverse order to removal .

Check the operation of the electric blind .