C5JK09F1 - 607

PROCEDURE FOR SWITCHING OFF/ON THE CENTRAL AIRBAGS AND SEAT BELTS SYSTEM

1 - DE-ACTIVATION

IMPERATIVE : ignition off : before carrying out any operation on the control unit (generation AC4-1 : wait for 30 seconds - generation EC5 : wait for 5 minutes) .

Switch off accessories fitted with micro-processors .

Disconnect the battery negative cable .

Protect the cable and the negative terminal to prevent any contact .

REMOVE THE FLOOR CONSOLE .

Disconnect the -way orange connector (18) .

WARNING : the ECU must never be removed with the connector (1) connected .

2 - ACTIVATION

IMPERATIVE : the surroundings of the air bags and the pre-tensioning seat belts must be clear of objects or occupants .

Switch off the ignition .

Reconnect the 18-way orange connector .

REFIT THE FLOOR CONSOLE .

Connect the battery negative cable .

On the driver's side : With the door open, switch on the ignition, clearing the deployment area of the steering module .

Check the correct operation of the system by means of the graphic on the instrument panel .

NOTE : after disconnecting the battery, some electronic systems (injection, safety auto-reverse system ... ) need an initialisation procedure ; perform the appropriate initialisation procedures .