VAG-COM
Recode
(VAG 1551/1552 function 07)

Recode is used to set various options
in a Control Module.

Warning!
You should refer to the Work Shop Manual for your particular 
car (or some other documented procedure) before attempting 
to ReCode a Control Module.  At the very least write down 
the original values.  There is no other way to "undo"
or restore the original values if what you're trying to do
doesn't work out.

Note: 
Some Modules require a valid Login before
you can re-code them.

A feature unique to VAG-COM:
You can leave the Work Shop Code unchanged,
or enter any workshop code you desire.
Certain other programs always leave a tell-tale
WSC when you re-code a module.

The Importer Number is only relevant for recoding
controllers that use KWP-2000. By default, this will
remain unchanged unless you have set up
an Importer Number in the Options screen.

Use the Do It! or Cancel buttons to return
to the Controller Info / Select Function screen.

Example uses of the Recode Function:

Reprogram Features in Audi Central Locking Systems:
A4/S4   TT-Coupe   TT-Roadster    A6    A8 

Adding a CD-Changer to some MY 2000 VW Radios:
http://www.ross-tech.com/vag-com/cars/vwmkIV.html

Shareware Limitation(s)

None