C4CG1LK1 - 607

REMOVAL - REFITTING FRONT DOOR FRAME UPPER TRIM

1 - TOOLING

[1] : Tool for positioning the seal nipple (Workshop reference (-).1349-B) .

2 - REMOVAL

Remove :

• THE TRIM PAD
• THE MIRROR
• the external weatherstrip on the window

Lower the glass fully .

Detach the door cheater seal (1) .

Front side of the door :

• remove the securing clips located at (A) and (B)
• detach the trim (2) from the door frame at the bottom front

Rear side of the door :

• detach the nipple from the trim (2) at the top rear (C)

Work the window groove seal (3) loose .

Using a screwdriver blade, raise the retaining clips (4) on the door frame .

Remove the upper trim (2) pulling it towards the outside of the door .

3 - REFITTING

Using the tool [1] ; Engage the trim seal nipple (2) to refit it at the top .

From Build Code 08512 : New fitting of the upper frame trims .

Using a cloth soaked in degreasing product, clean the surfaces which touch, in the area of the door frame hole (D) and trim .

Using a nozzle, put a spot of polyurethane bonding in the area of the hole (D) on the trim .

Refit the door frame trim .

Proceed in the reverse order to removal .