C5IG28F1 - 307

REMOVAL - REFITTING SUNROOF CABLES

1 - REMOVAL

Remove :

• the sun roof
• the moving panel
• the sunblind

Using an allen key, place the opening mechanism of the sunroof in the roof closed position .

remove the electric sunroof engine .

Uncouple the rods (1) of the corssmember (2) at (A) .

Unclip the crossmember (2) at (B) .

Remove the crossmember guides (3) by pulling them towards (C) .

Detach the drive carrier (4) equipped with the cable towards (C) .

Carry out the same operation on the other side .

2 - REFITTING

Proceed in the reverse order to removal .

Fit :

• electric sunroof motor
• sun blind
• opening sun roof
• sun roof

initialise and programme the sunroof .

Check the operation .